Cemcrete Cemcote Brushed

CEMCOTE BRUSHED

R561.20 – R2,029.75 Incl VAT

Cemcrete Cemcote Brushed is a finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water on-site to produce a smooth, flowing coating which sets rock hard.

Description

Benefits of Cemcrete Cemcote Brushed

For interior and exterior use
Brush-on or skim-on application
Durable and weatherproof
Interesting colour variation
Wears well over time

Specifications

Suitable Surfaces	Interior & exterior plastered or previously painted walls
Finish	Slightly textured when applied with a brush Smooth when applied with a trowel (See CemCote Skimmed)
Thickness	1.6 – 2.5mm
Application	Brush-on or spray-on
Packaging	5kg & 25kg containers
Coverage	Brush-on or Putzmeister application: 2- 5m² per kg/coat depending on suction and texture of the surface or 25-50m² per 25kg/2 coats
Curing	Initial set – 1 hour The completed work should be allowed to air cure for 24 hours after application, before mist spraying the entire wall from bottom to top (to prevent run marks) evenly at least twice during the day thereafter The moisture in the substrate must be less than 5% prior to sealing
Colour/s	Available in 14 colours

Additional information

Size	5kg Coverage 5kg (5-10m² (2 coats)), 25kg Coverage 25kg (25-50m² (2 coats))
Colour	White, Dusk, Dew, Straw, Tan, Fern Green, Concrete Grey, Anthill Grey, Dark Grey, Mist, Dawn, Storm Grey, Terracotta, Ochre

Brand

Cemcrete

System

What do you need?

Tools & Consumables

Mechanical Mixer
Large paintbrush

Products

CemBond
CemCote
Sealer of choice

The System

DOWNLOAD STEP-BY-STEP GUIDE

FAQ

Q: What is the difference between CemCote and CemWash?
A: CemCote has a finer texture than CemWash.

Q: Can my builder do the application?
A: If your painter has experience working with Cemcrete products and you feel confident in using them to do the application, then yes. Your painter can also attend our free demo days hosted at our Academy in Johannesburg. Please note attending these demo days does not mean your painter will be an experienced Cemcrete contractor. For more details of Cemcrete’s demo days or independent contractor details visit our contact us page.

Q: Do you have to seal a CemCote wall?
A: The use of a sealer is highly recommended. Either SiliconSeal on its own or as a primer for a topical sealer. The moisture in the substrate must be less than 5% prior to sealing. Ensure that the surface is free of any form of laitance or dust etc. before sealing with a suitable sealer fit for purpose in accordance with the manufacturer’s instructions. Sealers are best applied to a cool surface in multiple thin coats until an even sheen is achieved. Allow sufficient drying time between coats (product specific in accordance with the manufacturer’s instructions). Cemcrete manufacture a wide range of sealers designed for a specific purpose, dry film thickness and durability; (example: for use in wet areas etc). Please contact your local representative for the best solution to meet your needs.