Shop
You are here: Home / / Cemcrete Products / Cemcrete Pool Products / POOL SEALER
Cemcrete Pool Sealer
Cemcrete Pool Sealer 5L
Cemcrete Pool Sealer

POOL SEALER

Price range: R509.45 through R1,308.70 Incl VAT

Cemcrete Pool Sealer is a liquid sealer for treating leaking pools

​
An inexpensive sealer for treating leaking pools where seepage is through general porosity or thinness of the plaster. It will not seal plumbing leaks or structural cracks.​

SKU: N/A Categories: ,
Cemcrete

Description

Benefits of Cemcrete Pool Sealer

  • Inexpensive sealer
  • No need to empty your pool
Specifications
Suitable Surfaces
Leaking pools where seepage is through general porosity or thinness of the plaster
Finish
N/A
Thickness
N/A
Application
Add to water of pool
Packaging
5 & 20 litre containers​
Coverage
5 litre / 15 000 litre pool & 20 litres / 60 000 litre pool
Curing
10 days to see if treatment is effective
Colour/s
N/A

Additional information

Size

5L, 20L

Brand

Cemcrete

FAQ

Q: Can Pool Sealer be used to seal plumbing leaks or structural cracks?
​A: No. It will not seal plumbing leaks or structural cracks.
 
Q: What precautions must I take when using Pool Sealer?
A: Make sure that it does not go through the sand filter. You need to set the filter on bypass before Pool Sealer is used.Q: How long should Pool Sealer stay in the pool for?
A: It should stay in the pool for at least 7 days before it is vacuumed out of the water as per the datasheet.Q: What do I have to do to my pool in the 7 day period of using Pool Sealer?
A: You need to brush the surface very well for at least 15 minutes 2 – 3 times per day and allow the pump to run continuously during this brushing period. The sealer is much heavier than water. It will therefore lay on the bottom of the pool. This the reason that the surface needs to be brushed.Q: Can I swim during this period?
A:  No. Swimming should only commence after all the Pool Sealer has been vacuumed to waste and the water is balanced for swimming purposes.
 
Q: How do I remove the sealer from the pool?
A: Switch off the pump after 7 days. Leave the pump off for 24 hours to allow the sealer to settle to the bottom of the pool. Set the filter to waste and vacuum the surface allowing the sealer to be washed out to the waste pipe. Switch off the pump again and allow the sealer to settle again for 24 hrs. Repeat the vacuuming the next day. The day following this you may now start filtering the swimming pool and resume chemical dosing the normal way.

Downloads

Related products

POOL COATINGCemcrete Pool CoatingCT FloorsCemcrete ElastobondCT FloorsELASTOBOND